Set consisting of a card holder and a key holder, both made

QtyQuantity	1	50	100	200	500	750	1000
Price	5.81	5.41	5.08	4.82	4.55	4.35	4.18

Product

Code Description	ST95100-80 Set consisting of 1 card holder and 1 key holder, both made of metal and polyester (30% recycled). The card holder can hold up to 7 cards. Supplied in a premium kraft paper gift box. Ring: ø 32 mm \| Product: 87 x 25 x 7 mm \|. Product in dark grey color

Size:	Total: 114 x 32 x 7 mm \| Card holder: 95 x 65 x 13 mm \| Case: 125 x 135 x 17 mm

More details
In gift box, Our nature

Packaging

Packing:	Craft box. The purchased product with print will be repackaged with craft box
Inner packing: Outer packaging: Net Weight: Gross Weight: Packaging dimensions:	48 pieces 96 pieces 12,8 Kg 13,5 Kg 0,00295 x 0,00275 x 0,00485 cm
HS code:	4202321000

Certifications

All HiGift products are equipped with European certifications that guarantee compliance with specific directives, safety and environmental regulations and conformity of the articles according to current laws.

Prints

You can personalise the item VAUGHN in the positions that we list below.

Front
- Screen printing, with a maximum number of 1 color, in a print area of 100 x 100 mm.
Metal
- Engraving, in a print area of 15 x 15 mm.
- Pad printing, with a maximum number of 4 colors, in a print area of 15 x 15 mm.
Back
- Engraving, in a print area of 15 x 8 mm.
- Pad printing, with a maximum number of 4 colors, in a print area of 15 x 8 mm.
Upper front
- Digital transfer in full color, in a print area of 25 x 12 mm.
- Transfer printing, with a maximum number of 4 colors, in a print area of 25 x 12 mm.
Top Verse
- Digital transfer in full color, in a print area of 25 x 12 mm.
- Transfer printing, with a maximum number of 4 colors, in a print area of 25 x 12 mm.
Lower front
- Engraving, in a print area of 85 x 8 mm.
Interior
- Engraving, in a print area of 85 x 8 mm.
Metal
- Pad printing, with a maximum number of 4 colors, in a print area of 60 x 60 mm.

Your image on cheap promotional product: personalised Set consisting of a card holder and a key holder, both made of metal and recycled polyester (30% rPET) with your logo.

Custom set consisting of a card holder and a key holder, both made of metal and recycled polyester (30% rpet) becomes an extra tool to convey your brand or message. The importance of printing your own logo on personalized Set consisting of a card holder and a key holder, both made of metal and recycled polyester (30% rPET) will allow you to create an effective and impactful product. The opportunities to show off your custom set consisting of a card holder and a key holder, both made of metal and recycled polyester (30% rpet) are many: in your shop for the purchases of your customers, give the product at the fair as a gadget for visitors or print on your graphics and become a real promotional product for your e-commerce. Furthermore, during the organization of an event you will need a series of promotional items: among these the personalized set consisting of a card holder and a key holder, both made of metal and recycled polyester (30% rpet) is one of the most requested products to leave to the participants as a souvenir. Customize with the logo, date and colors of the event and use the gadget for a sample kit to give to everyone!

What kind of printing is possible?

You can personalise the item VAUGHN with screen printing, in engraving, in pad printing, in digital transfer or in transfer printing.

Screen printing is a traditional ink-based labelling process, for flat or flattenable products, with high durability and colour accuracy. During the screen printing process ink is directly pressed on the product's surface through a gauze, then fixed with heat treatment.

Engraving utilises lasers to mark a product's surface. The surface of the product practically burns in the process to develop the logo. Even small logos can be printed very accurately. Engraving is applicable to metal, wooden, glass and certain plastic products.

Pad printing is the most popular, traditional ink-based labelling method. This technology uses a silicone pad to transfer ink onto an item with fine details and high accuracy, applicable to a wide range of materials. Pad printing allows labelling curved surfaces.

Digital transfer printing is a modern, full-colour alternative to traditional transfer printing. The design is printed in photo quality onto transfer paper with a special digital printer, then applied to the product with a heat press. Our digital transfer technology carries no limitation in size or shape of imprints.

Transfer printing is based on traditional screen printing, however, instead of being directly screen printed onto an item, the design is printed onto transfer paper, then applied with a heat press. Transfer printing is applicable to a wide range of products and holds several advantages over screen printing.

You can find more information on all printing techniques, click here.

Can I see a preview of VAUGHN with my logo before it goes to print?

On HiGift there are two ways to see set consisting of a card holder and a key holder, both made of metal and recycled polyester (30% rpet) with your logo before purchasing. By clicking on try your logo in this product sheet you can create your graphic test to have a preview of how your personalized product will be. After the order, however, you will receive our professional graphic draft on which you can ask for changes until you are satisfied and you will give us the ok to go into production. If, on the other hand, you want to touch the product firsthand before buying a large quantity, you can order a sample; on many of our items you can have your logo printed even if it is a single piece, so you can evaluate the final sample and no longer have any doubts about the massive order to be placed. If you need further information, additional photographs or details not present in this product sheet, please contact us.

Which is the delivery time for set consisting of a card holder and a key holder, both made of metal and recycled polyester (30% rpet) VAUGHN?

The delivery time for the customized products is variable from 15 to 20 days, depending on the type of item and the customization that is going to be carried out. While if you buy the product without printing, you will have it in 5 days at latest. The count of days for the personalized product starts from your confirmation of our professional graphic draft that we will send you after 24 hours from the order. The delivery dates are visible in green both in this product sheet, in the cart and at checkout. For shipping we rely on the major international couriers. If you need specific information about the delivery of set consisting of a card holder and a key holder, both made of metal and recycled polyester (30% rpet) please contact us and we will provide you with all the details you need.

How will items arrive packed?

set consisting of a card holder and a key holder, both made of metal and recycled polyester (30% rpet) has a size of Total: 114 x 32 x 7 mm | Card holder: 95 x 65 x 13 mm | Case: 125 x 135 x 17 mm and a weight of 133,3 g. The goods are packaged in cartons of a size equal to 0,00295 x 0,00275 x 0,00485 cm, with a weight of 13,5 Kg, containing 96 pieces each.

More ideas?

If you want to give a gift but are still unsure of your choice, look for promotional items similar to VAUGHN (Set consisting of a card holder and a key holder, both made of metal and recycled polyester (30% rPET)) on HiGift in the category custom sustainable keyrings. Here you will surely find many promotional products that could be right for you!

VAUGHN - Set consisting of a card holder and a key holder, both made of metal and recycled polyester (30% rPET)