MOLDEN - Power Bank

MOLDEN - Power Bank

MK20859-00

External auxiliary battery with solar charging and 4,000 mAh charging capacity. Made of bamboo, with Type C input/output connection and 2 USB outputs. Presented in an individual kraft design box. Instructions manualin English and Spanish available.The capacities shown in all our external auxiliary batteries are real, all of them incorporating non-recycled, grade A batteries, with a service life of at least 500 charging cycles, and complying with CE regulations. In addition, they are manufactured according RoHS standards, and in compliance with the following safety requirements: Power bank overcharge protection system. Complete discharge protection system, which increases the durability of the power bank. Blocking system to prevent short circuits. Constant charging transfer system, in accordance with the capacity of the target device. (neutral color)
Product size: 7.3 x 1.4 x 15.5 cm

-4%	Flash offer
QtyQuantity	1	25	50	100	200	350	500
Price	12,47 ~~12,99~~	11,73 ~~12,22~~	11,14 ~~11,61~~	10,62 ~~11,07~~	10,10 ~~10,53~~	9,65 ~~10,06~~	9,28 ~~9,67~~

NEW HERE? Get 10€ off!
By signing up you’ll receive the code via email.

Sustainability

Suggested quantity: 10 pieces

You can also purchase this item in smaller quantities with a little surcharge.

Free graphic draft after the order

Changes can be requested and we will start printing only after your confirmation. In the event that the graphic draft can't meet your expectations, we will proceed with a full refund of your order.

Estimated dispatch time

Free shipping all over Europe

Order date

Friday 10 July

Shipping not printed items

Tuesday 14 July

Shipping printed items

Tue 28 Jul - Thu 30 Jul

Available

760

830
11-09-2026

3500
16-10-2026

Product details

Product

Code Description	MK20859-00 External auxiliary battery with solar charging and 4,000 mAh charging capacity. Made of bamboo, with Type C input/output connection and 2 USB outputs. Presented in an individual kraft design box. Instructions manualin English and Spanish available.The capacities shown in all our external auxiliary batteries are real, all of them incorporating non-recycled, grade A batteries, with a service life of at least 500 charging cycles, and complying with CE regulations. In addition, they are manufactured according RoHS standards, and in compliance with the following safety requirements: Power bank overcharge protection system. Complete discharge protection system, which increases the durability of the power bank. Blocking system to prevent short circuits. Constant charging transfer system, in accordance with the capacity of the target device. (neutral color)

Materials:	Bamboo
Size:	7.3 x 1.4 x 15.5 cm

More details
4000 mAh. Solar Charging. 2 USB Outputs. Type C Output and Input

Packaging


Inner packing: Outer packaging: Net Weight: Gross Weight: Packaging dimensions:	25 pieces 50 pieces 9,12 Kg 9.6 Kg 40.9 x 19.5 x 23.4 cm

Certifications

All HiGift products are equipped with European certifications that guarantee compliance with specific directives, safety and environmental regulations and conformity of the articles according to current laws.

Prints

You can personalise the item MOLDEN in the positions that we list below.

Area 1
- Engraving, in a print area of 55 x 25 mm.
- Pad printing, with a maximum number of 4 colors, in a print area of 55 x 25 mm.
- Digital transfer in full color, in a print area of 55 x 25 mm.
Area 2
- Digital transfer in full color, in a print area of 35 x 13 mm.
Area 3
- Digital transfer in full color, in a print area of 50 x 20 mm.

Your image on cheap promotional product: personalised Power Bank with your logo.

Custom power bank becomes an extra tool to convey your brand or message. The importance of printing your own logo on personalized Power Bank will allow you to create an effective and impactful product. The opportunities to show off your custom power bank are many: in your shop for the purchases of your customers, give the product at the fair as a gadget for visitors or print on your graphics and become a real promotional product for your e-commerce. Furthermore, during the organization of an event you will need a series of promotional items: among these the personalized power bank is one of the most requested products to leave to the participants as a souvenir. Customize with the logo, date and colors of the event and use the gadget for a sample kit to give to everyone!

What kind of printing is possible?

You can personalise the item MOLDEN with engraving, in pad printing or in digital transfer.

Engraving utilises lasers to mark a product's surface. The surface of the product practically burns in the process to develop the logo. Even small logos can be printed very accurately. Engraving is applicable to metal, wooden, glass and certain plastic products.

Pad printing is the most popular, traditional ink-based labelling method. This technology uses a silicone pad to transfer ink onto an item with fine details and high accuracy, applicable to a wide range of materials. Pad printing allows labelling curved surfaces.

Digital transfer printing is a modern, full-colour alternative to traditional transfer printing. The design is printed in photo quality onto transfer paper with a special digital printer, then applied to the product with a heat press. Our digital transfer technology carries no limitation in size or shape of imprints.

You can find more information on all printing techniques, click here.

Can I see a preview of MOLDEN with my logo before it goes to print?

On HiGift there are two ways to see power bank with your logo before purchasing. By clicking on try your logo in this product sheet you can create your graphic test to have a preview of how your personalized product will be. After the order, however, you will receive our professional graphic draft on which you can ask for changes until you are satisfied and you will give us the ok to go into production. If, on the other hand, you want to touch the product firsthand before buying a large quantity, you can order a sample; on many of our items you can have your logo printed even if it is a single piece, so you can evaluate the final sample and no longer have any doubts about the massive order to be placed. If you need further information, additional photographs or details not present in this product sheet, please contact us.

Which is the delivery time for power bank MOLDEN?

The delivery time for the customized products is variable from 15 to 20 days, depending on the type of item and the customization that is going to be carried out. While if you buy the product without printing, you will have it in 5 days at latest. The count of days for the personalized product starts from your confirmation of our professional graphic draft that we will send you after 24 hours from the order. The delivery dates are visible in green both in this product sheet, in the cart and at checkout. For shipping we rely on the major international couriers. If you need specific information about the delivery of power bank please contact us and we will provide you with all the details you need.

How will items arrive packed?

power bank has a size of 7.3 x 1.4 x 15.5 cm and a weight of 182,4 g. The goods are packaged in cartons of a size equal to 40.9 x 19.5 x 23.4 cm, with a weight of 9.6 Kg, containing 50 pieces each.

More ideas?

If you want to give a gift but are still unsure of your choice, look for promotional items similar to MOLDEN (Power Bank) on HiGift in the category promotional solar power banks. Here you will surely find many promotional products that could be right for you!

Reviews

2012 - Gadget Lab Srl -

Via Antonio Pacinotti, 9 51100 Pistoia, Italy - Tel:( 39 ) 0573 1790334, E-mail: info(at)higift.eu, P.Iva IT02127840474